Steps for Replacing a Kitchen Sink Spray Nozzle in your Dakota County Home

Replacing an old or broken spray nozzle in the kitchen sink in your Dakota County home is relatively easy and shouldn’t require many tools. Depending on the style of your old nozzle, you may need to replace the hose, but most models are universal and will work with your current hose. If the package tells you that you need to upgrade your hose, try installing the new nozzle before you buy a hose. Some brands will also include the tools you will need to complete the project. Don’t buy pipe thread if you are not replacing the hose. For this plumbing repair, all you will need is a pair of needle nose pliers and maybe a screwdriver.

1. Remove the Old Nozzle Head

You don’t necessarily have to turn off the water if you are just replacing the nozzle on your sprayer hose, but it would be a good idea to avoid accidentally turning on the faucet, which will cause the water to shoot out of the hose while the nozzle is off. Simply unscrew the old nozzle and look for a small metal clip that holds the rest of the housing in place (your new nozzle should have the same part and where to locate it in the instructions). You will probably need needle nose pliers to pull this clip off. It looks like a horseshoe and will be located below the washers. Once you remove the clip, you can take off the base of the old nozzle. Look at how it is assembled as you remove it; your new one will have basically the same construction, so seeing how it is attached will help you install the new nozzle.

2. Unscrew the Mounting Nut and Replace Nozzle Base

The mounting nut is the large nut located under the sink just below the nozzle. It keeps the base of the nozzle in place. Hold down the base of the nozzle as you unscrew the mounting nut. This may be tricky depending on the design of your sink. You might want to get someone to hold the base in place so that you have better access to the mounting nut. Once you unscrew the nut from the base, you can guide the hose through the opening in the sink to take slide off the old nut and replace it with the new mounting nut. Next, put the hose back through the hole and install the new base by screwing it into the new mounting nut.

3. Install New Nozzle

If you unscrew the top part of the nozzle from the bottom where the metal clip is attached (your instructions should label them with letters), you may find the washers inside or packaged separately with the clip. Slide the bottom part of the nozzle onto the hose and install the metal clip on the bottom ridge of the plastic part of the hose with the pliers. Next put the plastic washer around the tube, and then the rubber one. Then, simply screw on the top part of the nozzle and test it for leaks. Don’t tighten the nozzle too much, because the parts are delicate and could break with too much pressure. If you can’t fit the nozzle on without leaks, you may need a different style hose. Whenever you need help with bathroom of kitchen plumbing in Dakota County home, feel free to call the experts at Air Mechanical Inc to ask questions and get advice.